Shaper Pat Rawson
10'6" A
Overall Bottom Length:
10' 8" (325.12 cm)
Tip-to-tip Deck Length:
10' 6 5/8" (321.63 cm)
Maximum Width:
23 3/8" (59.37 cm)
Maximum Thickness:
3 ¾" (9.53 cm)
Displacement:
Forthcoming
History:
Introduced September 2006
Rockers:
Natural
Shaper's Comments:
This newly made 10’6”A blank was lengthened to easily net a 10’6” bottom length. Using parts of the old 10’6” as a start, I kept the rail shape the same for less waste and stronger foam, and widened the point by 3/8”. The new natural rocker in this mold design is the 10’6”A +5/8” nose, +¾” tail. This rocker being shaped in instead of glued up, will allow for a much more accurate finished rocker, due to no “spring back.” I have the old 10’6” natural rocker if anyone still wants it. All the “A” series of blanks are designed to take the majority of thickness off the bottom, leaving small adjustments in the nose and tail rocker and their thicknesses. This blank can be ordered wider or narrower as to allow for stronger decks/rails near the perimeter of the board outline, and less waste.
