High-build, easy-to-sand resin.
A wax-inhibited, UV-stable surfacing resin. Designed for finish coating fiberglass, polyurethane foam, and most wood surfaces to produce a sandable, paintable, stain-resistant surface. Do not use on polystyrene. Do not use in direct sunlight. Working time of mixed resin is approximately 18-20 minutes.
Mixing
Fiberglass Hawaii MEKP catalyst must be used as a hardening agent. All Fiberglass Hawaii polyester resins are two part systems except for our UV Cure Surfboard Resins.
Application
To avoid waste, mix only the volume of resin that can be applied in 18-20 minutes. Spread evenly over the entire surface, approximately 12-18 mils thick (about the thickness of a dime or 1/32 of an inch).
Uses
Finish coating fiberglass laminated surfaces, most woods, fiberglass tanks, tables, and bar tops.
Keep out of reach of children
Material Data Safety Sheets (MSDS)
To request product MSDS please email: Product Support
*Prices subject to change without notice.
| Item Number | Description | Volume | Price |
|---|---|---|---|
| RPOO-MS01 | Marine Surfacing | Pint | $8.15 |
| RPOO-MS02 | Marine Surfacing | Quart | $12.40 |
| RPOO-MS04 | Marine Surfacing | Gallon | $32.05 |
| RPOO-MS05 | Marine Surfacing | 5 Gal | $106.75 |
| RPRI-32737 | Marine Surfacing | Drum | Call |
